 |
|
NPI40 Pellet Insert
Line dimensions are to be used as a guide only.
Please consult your installation manual for updated and
precise measurements before proceeding to install or frame
your Napoleon Fireplace. Check all Local and
National Building Codes and Gas Regulations.
NPI40 Pellet Insert |
Specifications
|
NPI40
|
| Fuel |
Pellet |
BTU Output
|
8,000 - 40,000 |
| Hopper Capacity |
45 lbs |
Area Heated
|
up to 2,000 sq. ft.
|
| Burn rate |
1-5 lbs per hour |
| Burn time |
45 hours low heat |
| Flue Diameter |
3" |
| Electrical rating |
115 volts, 3.6 Amps, 60 Hz |
| Blower kit |
Included |
| Mobile Home Approved |
Yes |
Additional Information
- Small pellets will increase or decrease the stated burn rates and burn times
- Differences of plus or minus 20% may occur depending on fuel quality
- This heater has been tested to ASTM E 1509, UL 1482, ULC S627
|
|
|
|
